Tugger the SLUGger!SLUG Mailing List Archives

Re: [SLUG] Re: USB - Harddrive

checked the /var/log/messages file, copy the relevant info out here, and than the lsmode output
i've put /dev/sda1 /mnt/USB auto noauto,owner,kuzu 0 0 

into FSTAB and tried to mount again, no luck

cheers,

May 25 19:34:29 cape kernel: Freeing unused kernel memory: 136k freed
May 25 19:34:29 cape kernel: usb.c: registered new driver usbdevfs
May 25 19:34:29 cape smartd: smartd startup failed
May 25 19:34:29 cape kernel: usb.c: registered new driver hub
May 25 19:34:29 cape kernel: usb-uhci.c: $Revision: 1.275 $ time 15:37:48 Oct 29 2003 
May 25 19:34:29 cape kernel: usb-uhci.c: High bandwidth mode enabled
May 25 19:34:29 cape kernel: PCI: Found IRQ 11 for device 00:07.2
May 25 19:34:29 cape kernel: PCI: Sharing IRQ 11 with 00:07.3
May 25 19:34:29 cape kernel: PCI: Sharing IRQ 11 with 00:0f.0
May 25 19:34:29 cape kernel: usb-uhci.c: USB UHCI at I/O 0xc400, IRQ 11
May 25 19:34:29 cape kernel: usb-uhci.c: Detected 2 ports
May 25 19:34:29 cape kernel: usb.c: new USB bus registered, assigned bus number 1 
May 25 19:34:29 cape kernel: hub.c: USB hub found
May 25 19:34:29 cape kernel: hub.c: 2 ports detected
May 25 19:34:29 cape kernel: PCI: Found IRQ 11 for device 00:07.3
May 25 19:34:29 cape kernel: PCI: Sharing IRQ 11 with 00:07.2
May 25 19:34:29 cape kernel: PCI: Sharing IRQ 11 with 00:0f.0
May 25 19:34:29 cape kernel: usb-uhci.c: USB UHCI at I/O 0xc800, IRQ 11
May 25 19:34:29 cape kernel: usb-uhci.c: Detected 2 ports
May 25 19:34:29 cape kernel: usb.c: new USB bus registered, assigned bus number 2 
May 25 19:34:29 cape kernel: hub.c: USB hub found
May 25 19:34:29 cape kernel: hub.c: 2 ports detected
May 25 19:34:29 cape kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver 
May 25 19:34:30 cape kernel: usb.c: registered new driver hiddev
May 25 19:34:30 cape kernel: usb.c: registered new driver hid
May 25 19:34:30 cape kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@xxxxxxx> 
May 25 19:34:30 cape kernel: hid-core.c: USB HID support drivers
May 25 19:34:30 cape kernel: mice: PS/2 mouse device common for all mice
May 25 19:34:30 cape kernel: hub.c: new USB device 00:07.3-1, assigned address 2 May 25 19:34:30 cape kernel: input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb2:2.0 May 25 19:34:30 cape kernel: hub.c: new USB device 00:07.3-2, assigned address 3 May 25 19:34:30 cape kernel: usb.c: USB device 3 (vend/prod 0x5e3/0x702) is not claimed by any active driver. 



LSMODE OUTPUT


Module                  Size  Used by    Not tainted
vfat                   12812   0  (autoclean)
fat                    38488   0  (autoclean) [vfat]
via82cxxx_audio        24056   1  (autoclean)
ac97_codec             17064   0  (autoclean) [via82cxxx_audio]
uart401                 8356   0  (autoclean) [via82cxxx_audio]
sound                  73300   0  (autoclean) [via82cxxx_audio uar t401]
soundcore               6500   4  (autoclean) [via82cxxx_audio sou nd]
parport_pc             18788   1  (autoclean)
lp                      8868   0  (autoclean)
parport                36800   1  (autoclean) [parport_pc lp]
autofs                 13236   0  (autoclean) (unused)
rfcomm                 37696   0  (autoclean)
l2cap                  19660   2  (autoclean) [rfcomm]
bluez                  40388   1  (autoclean) [rfcomm l2cap]
8139too                16808   2
mii                     3992   0  [8139too]
ipt_MASQUERADE          2328   3  (autoclean)
iptable_nat            21432   1  (autoclean) [ipt_MASQUERADE]
ip_conntrack           28840   1  (autoclean) [ipt_MASQUERADE ipta ble_nat]
iptable_filter          2444   1  (autoclean)
ip_tables 15264 5 [ipt_MASQUERADE iptable_nat ipta ble_filter] 
floppy                 57020   0  (autoclean)
sg                     35852   0  (autoclean) (unused)
sd_mod                 13740   0  (autoclean) (unused)
scsi_mod              107080   2  (autoclean) [sg sd_mod]
ide-cd                 35488   0  (autoclean)
cdrom                  33216   0  (autoclean) [ide-cd]
keybdev                 2944   0  (unused)
mousedev                5428   1
hid                    24356   0  (unused)
input                   5824   0  [keybdev mousedev hid]
usb-uhci               25964   0  (unused)
usbcore                78368   1  [hid usb-uhci]
ext3                   70532   2
jbd                    51732   2  [ext3]

wolfgang wrote:


 Ok now we now that you have two UHCI usb controlers and
 therefor uhci_hcd.o kernel modul should be used (check with lsmod if
 loaded)

 Have you also checked syslog and dmesg,
 please send this information as well

 Regards

 Wolfgang



On Wed, 25 May 2005 19:20:09 +1000, dimitri <dimitri@xxxxxxxxxxx> wrote:
done what you've asked, that's the output from it. No idea what it means, as I say, novice here. Hope to find help, thanks...
00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 1a) (prog-if 00 [UHCI]) 
        Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
        Flags: bus master, medium devsel, latency 32, IRQ 11
        I/O ports at c400 [size=32]
        Capabilities: [80] Power Management version 2
00:07.3 USB Controller: VIA Technologies, Inc. USB (rev 1a) (prog-if 00 [UHCI]) 
        Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
        Flags: bus master, medium devsel, latency 32, IRQ 11
        I/O ports at c800 [size=32]
        Capabilities: [80] Power Management version 2
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) 
        Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
        Flags: medium devsel, IRQ 3
        Capabilities: [68] Power Management version 2
00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50) Subsystem: VIA Technologies, Inc. VT82C686 AC97 Audio Controller 
        Flags: medium devsel, IRQ 12
        I/O ports at cc00 [size=256]
        I/O ports at d000 [size=4]
        I/O ports at d400 [size=4]
        Capabilities: [c0] Power Management version 2
00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 
        Subsystem: Realtek Semiconductor Co., Ltd. RT8139
        Flags: bus master, medium devsel, latency 32, IRQ 10
        I/O ports at dc00 [size=256]
        Memory at d7000000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2
00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 
        Subsystem: Realtek Semiconductor Co., Ltd. RT8139
        Flags: bus master, medium devsel, latency 32, IRQ 11
        I/O ports at e000 [size=256]
        Memory at d7001000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2
01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1 (prog-if 00 [VGA]) 
        Subsystem: Unknown device 0001:0000
        Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 10
        Memory at d5800000 (32-bit, non-prefetchable) [size=8M]
        Memory at d6000000 (32-bit, non-prefetchable) [size=128K]
        Memory at d5000000 (32-bit, non-prefetchable) [size=8M]
        Expansion ROM at <unassigned> [disabled] [size=64K]
        Capabilities: [80] AGP version 1.0
        Capabilities: [90] Power Management version 1


wolfgang wrote:


Hi Dimitri,

check /var/log/syslog or /var/log/messages and replug you HardDrive

tail -f /var/log/syslog

also run dmesg for kernel messages.

lspci -v
should show you which controler is used, maybe you have the wrong kernel driver loaded. 
Which distribution and Kernel (uname -r) do you use?

Repost output and we can check more in detail.

Regards

Wolfgang
On Wed, 25 May 2005 18:37:19 +1000, dimitri <dimitri@xxxxxxxxxxx> wrote:
I have RedHat Fedora installed and have troubles mounting my external USB HardDrive. Tried what ever I could find on the net and in forums but somehow I did not manage it. Still a novice. 

Any help out there, Thanks a lot...

Dimitri
Generated by Mhonarch. Optimized for Standards.
Linux is a trademark of Linus Torvards.