Tugger the SLUGger!SLUG Mailing List Archives

[SLUG] USB - Harddrive


done what you've asked, that's the output from it. No idea what it means, as I say, novice here. Hope to find help, thanks...


00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 1a) (prog-if 00 [UHCI])
       Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
       Flags: bus master, medium devsel, latency 32, IRQ 11
       I/O ports at c400 [size=32]
       Capabilities: [80] Power Management version 2

00:07.3 USB Controller: VIA Technologies, Inc. USB (rev 1a) (prog-if 00 [UHCI])
       Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
       Flags: bus master, medium devsel, latency 32, IRQ 11
       I/O ports at c800 [size=32]
       Capabilities: [80] Power Management version 2

00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
       Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
       Flags: medium devsel, IRQ 3
       Capabilities: [68] Power Management version 2

00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50)
       Subsystem: VIA Technologies, Inc. VT82C686 AC97 Audio Controller
       Flags: medium devsel, IRQ 12
       I/O ports at cc00 [size=256]
       I/O ports at d000 [size=4]
       I/O ports at d400 [size=4]
       Capabilities: [c0] Power Management version 2

00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
       Subsystem: Realtek Semiconductor Co., Ltd. RT8139
       Flags: bus master, medium devsel, latency 32, IRQ 10
       I/O ports at dc00 [size=256]
       Memory at d7000000 (32-bit, non-prefetchable) [size=256]
       Capabilities: [50] Power Management version 2

00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
       Subsystem: Realtek Semiconductor Co., Ltd. RT8139
       Flags: bus master, medium devsel, latency 32, IRQ 11
       I/O ports at e000 [size=256]
       Memory at d7001000 (32-bit, non-prefetchable) [size=256]
       Capabilities: [50] Power Management version 2

01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1 (prog-if 00 [VGA])
       Subsystem: Unknown device 0001:0000
       Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 10
       Memory at d5800000 (32-bit, non-prefetchable) [size=8M]
       Memory at d6000000 (32-bit, non-prefetchable) [size=128K]
       Memory at d5000000 (32-bit, non-prefetchable) [size=8M]
       Expansion ROM at <unassigned> [disabled] [size=64K]
       Capabilities: [80] AGP version 1.0
       Capabilities: [90] Power Management version 1


wolfgang wrote:

Hi Dimitri,

check /var/log/syslog or /var/log/messages and replug you HardDrive

tail -f /var/log/syslog

also run dmesg for kernel messages.

lspci -v

should show you which controler is used, maybe you have the wrong kernel driver loaded.
Which distribution and Kernel (uname -r) do you use?

Repost output and we can check more in detail.

Regards

Wolfgang




On Wed, 25 May 2005 18:37:19 +1000, dimitri <dimitri@xxxxxxxxxxx> wrote:

I have RedHat Fedora installed and have troubles mounting my external USB HardDrive. Tried what ever I could find on the net and in forums but somehow I did not manage it. Still a novice.

Any help out there, Thanks a lot...

Dimitri