Re: [SLUG] OT: question about IBM Aptiva

[Michael Lake <Mike.Lake@xxxxxxxxxx>]

> * Kevin Saenz (ksaenz@xxxxxxxxxxxxxxx) wrote:
>>I know this is a little off topic,
>>Does anyone know how to get to the bios on an IBM APtiva?

Trevor D. Manning wrote:
> Googled "access+bios+IBM+Aptiva", and it's covered on the first hit:
> http://www.iomega.com/support/documents/10894.html
> # IBM® Aptiva
> To access the IBM Aptiva Setup (BIOS) utility:
> Press the F1 key at restart.

yes. note that what I sent was how to bypass the bios password. there is 
a difference. Kevin prob needs what Trevor sent him not what I sent :-) 
I have been too busy reading security stuff lately.

-- 
Michael Lake
Chemistry, Materials & Forensic Science, UTS
Ph: 9514 1724 Fx: 9514 1460




UTS CRICOS Provider Code:  00099F

DISCLAIMER
========================================================================
This email message and any accompanying attachments may contain
confidential information.  If you are not the intended recipient, do not
read, use, disseminate, distribute or copy this message or attachments.
If you have received this message in error, please notify the sender
immediately and delete this message. Any views expressed in this message
are those of the individual sender, except where the sender expressly,
and with authority, states them to be the views the University of
Technology Sydney. Before opening any attachments, please check them for
viruses and defects.
========================================================================