[SLUG] Linux routing between 2 nics

["Tim Sutton" <suttont@xxxxxxxxxxxxxxxxxxx>]

Hi

I think this was brought up a couple of weeks ago, but I can't find it in
the archive, so my apologies if if retraces ground already covered. I am
trying to set up a linux box as a bridge between 2 networks:


eth0      Link encap:Ethernet  HWaddr 00:C0:DF:03:BF:1C
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:117987 errors:2 dropped:0 overruns:0 frame:0
          TX packets:1087 errors:0 dropped:0 overruns:0 carrier:0
          collisions:123 txqueuelen:100
          Interrupt:10 Base address:0x7400

eth1      Link encap:Ethernet  HWaddr 00:50:BF:20:ED:D2
          inet addr:10.184.249.62  Bcast:10.184.249.63  Mask:255.255.255.224
          UP BROADCAST RUNNING  MTU:1500  Metric:1
          RX packets:147165 errors:0 dropped:0 overruns:0 frame:0
          TX packets:209511 errors:11 dropped:0 overruns:1 carrier:9
          collisions:114872 txqueuelen:100
          Interrupt:5 Base address:0x7000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:3924  Metric:1
          RX packets:29159 errors:0 dropped:0 overruns:0 frame:0
          TX packets:29159 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0